4G LTE Dash Cam Manufacturer – Customization Flow

Customization Matrix & Order Flow

Working with a 4g lte dash cam manufacturer is mostly a question of what you can specify before the first carton leaves the line: card size, cable length, mounting kit, branding and the alert rules that ship inside the unit. This page opens up that configuration layer on the iSV-D6Plus, a two-channel 4G build with a built-in screen. Teams that also carry a deployment brief can read the same matrix as a fleet dash cam supplier checklist — what is fixed, what is built to order, and what has to be decided before production.

2Channels — road + cabin, recorded on one timeline
2KFront resolution at 30 fps, 140° ultra-wide lens
512 GBmicroSD ceiling with H.265 compression
4G LTELive view plus Wi-Fi at base, CloudiCar app
iSV-D6Plus 4G+2K 2CH Car DVR Camera with Screen, GPS Tracking Alarm Function
Build sheet

The iSV-D6Plus as a buildable configuration

Read this as a production sheet rather than a feature list. Everything in the right-hand column ships as standard; the four items marked built-to-order in the next module are the ones your order actually varies.

iSV-D6Plus dual-channel 4G dash cam body with built-in screen iSV-D6Plus 4G 2K two-channel car DVR camera hardware view

Road-facing 2K at 30 fps and a 1080P infrared cabin channel record simultaneously; the built-in screen lets an installer confirm both feeds at the vehicle.

ParameterValue as specified
Channels2 — front/road + cabin, simultaneous recording
Front resolutionTrue 2K at 30 fps
Cabin resolution1080P with infrared illumination
Lens140° ultra-wide
Image processingWDR (wide dynamic range), super night vision
DisplayBuilt-in screen
Connectivity4G LTE; Wi-Fi
App / platformCloudiCar app; PC platform
GPSBuilt-in GPS tracking
StoragemicroSD up to 512GB
CompressionH.265
SensorsG-sensor (impact and event tagging)
Power managementParking monitor with low battery protection
Order configurationBuilt to order — card size, cable type and length, mounting kit, branding
Scenario router

Match the build to how the vehicles actually run

Four common operating profiles, each tied to a specification that already exists on the iSV-D6Plus and to the one ordering decision it forces.

Ride-hail and taxi fleets

Passenger-area incidents need a second viewpoint, and drivers need to be reachable without a phone call. The cabin channel records at 1080P with infrared illumination, and two-way audio runs over the same 4G LTE connection — including while the vehicle is parked and connected.

Buyer decisionConfirm the cabin channel and audio policy before the sample, and settle driver consent wording at the same time.

Urban delivery vans

Most claims come from stationary time. Parking monitor and the G-sensor tag impacts as events, and low battery protection guards the vehicle battery between shifts; event clips can also be kept in the cloud so a copy survives card overwrite or swap.

Buyer decisionSet the parked-hours power policy, then size the card against the number of stops per day rather than the number of kilometres.

Long-haul trucks

High mileage means high footage volume. H.265 compression stretches the microSD card to a 512GB ceiling with continuous loop recording that overwrites the oldest files first, while event clips are pushed out before they age out.

Buyer decisionChoose the card size as a built-to-order line and fix a loop policy that matches the retention your insurer or client contract asks for.

Rental and shared vehicles

Accountability questions start with location. Built-in GPS tracking puts live position on a map, geofence alarms fire on entering or leaving a defined boundary, and an SOS alarm can be triggered by the driver — all arriving in one alert stream in the app.

Buyer decisionDraw the geofence boundaries per depot and set over-speed thresholds per vehicle type before the rules are pre-loaded.

Pre-sets

What gets configured before power-on

These are behavioural settings, not hardware options. Each one can be prepared for your order so the unit behaves correctly the first time a driver starts the vehicle.

Geofence boundaries

Alarms fire when a vehicle enters or leaves a defined area, so depot and customer-site movements can be reviewed without pulling footage.

Per-vehicle or per-group rules

Over-speed thresholds

The threshold is settable per vehicle type, so a light van and a heavy truck in the same account can be judged against different limits.

Threshold settable by vehicle type

SOS trigger

The driver-triggered SOS alarm sits alongside anti-theft and parking monitoring, and every alert lands in a single stream inside one app.

One alert stream

Parking and low-battery behaviour

Low battery protection is part of the standard build; the parked-hour policy around it is what your order fixes, based on shift patterns.

Low battery protection included

H.265 loop policy

Continuous loop recording overwrites the oldest files first on a card up to 512GB, with H.265 compression holding more hours per gigabyte.

microSD up to 512GB

Lens aiming at install

The built-in screen lets the installer aim both lenses, confirm both channels are live and replay a clip at the vehicle without opening the app.

2K front + 1080P IR cabin
iSV-D6Plus 4G 2K 2CH car DVR camera with screen and GPS tracking
Order flow

From inquiry to shipping, six stages

Each stage lists what the buyer has to hand over. Nothing moves to the next stage until that item is settled, which is what keeps built-to-order lines from being re-cut mid-batch.

1. Inquiry

Buyer supplies: target volume, destination region and the built-to-order lines you already know you need — card size, cable length, mounting kit, branding.

2. Sample

Buyer evaluates: the standard build — 2K front, 1080P infrared cabin, 140° lens, WDR, built-in screen — against the vehicles it will actually be fitted to.

3. Validation

Buyer tests: 4G LTE live view, two-way audio, push alerts and the GPS alarm set on your own routes before any customization is locked.

4. Pilot batch

Buyer approves: branding artwork and placement, plus geofence and over-speed thresholds grouped per vehicle type.

5. Mass production

Buyer locks: microSD card size up to 512GB, cable type and length, and the mounting kit — the three built-to-order lines that cannot change after the lock.

6. Shipping

Buyer confirms: consignee details and destination paperwork, with alert rules and app access already prepared per fleet group.

Send the brief, get the configuration back

Give us the vehicle mix and the four built-to-order lines and you get a build sheet back on the iSV-D6Plus — not a catalogue page. Sales replies directly by email or phone.

  • Fleet size and vehicle type
  • Card size up to 512GB
  • Cable type and length
  • Mounting kit and branding
  • Alert rules per vehicle group

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

GPS Geofence and Overspeed Alerts in Commercial Fleet Monitoring

GPS geofence and overspeed alerts are rule-based location functions: the device first judges position and speed, then decides whether to send a notification.

Read article

H.265 Compression and 512GB Storage in 4G Fleet Dash Cams

H. 265 encoding and 512GB card support change how a 4G dash cam balances local recording depth against upload traffic, without fixing a retention period.

Read article

Built-In Screens in 4G Dash Cams for Installation Calibration

A built-in screen is one of the most practical installation tools in a 4G dash cam, because it shows both camera views before the vehicle leaves the bay.

Read article

Frequently Asked Questions

what are the two recording channels on the isv-d6plus?

the front/road camera records in true 2k at 30 fps, and the cabin camera records at 1080p with infrared illumination. both channels record simultaneously on one timeline.

how does the isv-d6plus support remote live view and alerts?

the isv-d6plus connects over 4g lte for remote live view in the cloudicar app or on a pc platform, and it can also connect over wi-fi when the vehicle is at base. the same lte connection supports two-way audio and push alerts.

what gps tracking and alarm functions does the isv-d6plus include?

built-in gps tracking provides live position on a map, geofence alarms, over-speed alarms with thresholds settable per vehicle type, an sos alarm, anti-theft and parking monitoring, and low battery protection. alerts arrive in one stream in a single app.

how much footage can the isv-d6plus store?

continuous loop recording uses a microsd card up to 512gb, overwriting the oldest files first. h.265 compression helps fit more recording time per gigabyte, the g-sensor tags impacts as events, and event clips can also be kept in the cloud.

what is the built-in screen used for during installation?

the built-in screen lets an installer aim both lenses, confirm both channels are live, and replay clips at the vehicle without opening the app.

what can be customized when ordering the isv-d6plus?

the isv-d6plus is built to order. card size, cable type and length, mounting kit, and branding are set per order, and alert rules can be tuned per vehicle or per group.

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name
Email *
Message
Verification Code *
Click to verify
Leave a message
Name
Email *
Message
Verification Code *
Click to verify